Design
Systems & Technologies presents:
==========================================================
Spring 2002
SHIPCONSTRUCTOR PRESENTATION / TRAINING SEMINARS
Structure, Outfitting, Nesting, Piping, Project database, Project
manager, Automatic output drawings & database reports
==========================================================
=> AMSTERDAM, Netherlands, 17,18,19 April 2002
(location to be announced)
to
be repeated in
=> ANTIBES - Sophia Antipolis, France, 22,23,24 April
2002
Mediathèl Hotel in Sophia Antipolis (06)
Route des Crêtes
tel +33-04-9294 6800 / fax +33-04-9365 4341
info@mediathel.com / www.mediathel.com
by
Albacore Research (Canada) & Design Systems & Technologies
(F)
Speakers:
Mr. Eric DIONNE - Albacore Research (Canada)
Mr. Stéphane DARDEL - Design Systems & Technologies
(F)
Click
to download this document in pdf format
===================
SEMINAR LANGUAGE, LANGUE, LINGUA 
 
> traduction en Français disponible
> traduzione in Italiano disponibile
NB: Design Systems & Technologies est formateur agrée,
vous pouvez donc demander le soutien financier de votre établissement
de formation, continu pour les frais de séminaire
===========
IMPORTANT
FRANÇAIS:
> Ce séminaire est conçu pour utilisateurs des
tous niveaux
> Les places seront limitées pour assurer l'efficacité
de la session de formation (travaux pratiques)
> Les participants devront amener leur propre ordinateur (portable
de préférence)
> Les participants aux sessions de travaux pratique recevront
une licence d'essai valable 30 jours, ansi qu'une remise de 10%
sur les achats de licences ShipConstructor avant le 31 May 2002
ENGLISH:
> This seminar is designed for users of all levels
> Number of available seats will be limited to ensure maximum
effectiveness of the hands-on training session
> Participants are required to bring their own (lap-top) computer
> Participants to the hands-on training sessions will receive
a free 30 day trial license (single seat, stand-alone), and 10%
discount on ShipConstuctor purchases completed before 31 May 2002.
ITALIANO:
> Questo seminario è destinato ad utenti di tutti i
livelli
> Il numero dei partecipanti sarà limitato per assicurare
l'efficacia della sessione di formazione pratica
> I partecipanti dovranno portare il proprio computer (si raccomanda
un portatile)
> I partecipanti alle sessioni di formazione pratica riceveranno
gratuitamente una licenza di prova valida 30 giorni, ed una riduzione
del 10% sul software ShipConstructor acquistato entro il 31 Maggio
2002.
====================================================
TWO IDENTICAL SEMINARS IN TWO DIFFERENT LOCATIONS
The two seminars
will be identical in program and schedule. Only dates and locations
are different. The two locations have been selected for geographical
convenience. You can attend whichever seminar is most convenient
for you.
=================
SHIPCONSTRUCTOR
The ShipConstructor software suite is a powerful, easy-to-use,
AutoCAD based product modeling tool for ships and offshore structures.
Fair, loft, model 3D structure, route pipe, outfit, nest parts,
and produce NC-code all within an easy-to-use, familiar interface.
Built around an SQL Server database, ShipConstructor offers up
to date, accurate production reports at any time.
ShipConstructor,
is a superior modeling and production tool, of significant impact
in increasing quality, efficiency and overall cost savings. Designed
to use a common platform that anyone can use, ShipConstructor
runs inside AutoCAD and promotes inter-departmental co-operation
and simplifies communication; two areas where costly mistakes
and production bottlenecks tend to occur.
The centralized
product model database provides project standards and libraries
enforcing consistent drawings. All drawings and parts are linked
to a high performance SQL Server database (transparent to the
user). Security privileges allow for real-time access to the same
integrated product model for all user groups while preventing
accidental data corruption.
===============================
DESIGN SYSTEMS & TECHNOLOGIES
www.ds-t.com
Active exclusively in the ship design and ship building industries
for over 15 years, we have equipped over 400 companies in Europe
alone with specialized software. We also provide expert training,
technical support and engineering services to our customers. DS&T
is not simply a software vendor, but rather a long term, supportive
partner.
ALBACORE
RESEARCH
www.albacore research.com
ARL was founded in 1991 with the launching of ShipCAM, still today
the tool of reference in double-curvature shell plate expansion.
ShipConstructor for AutoCAD was first released in 1996 to perform
structural modeling, outfit modeling, and nesting. The integrated
Piping module has been available since late 2001. About 1000 seats
of ShipConstructor are installed world-wide. ShipConstructor won
the Marine Log 2001 Award for "Enhancing Shipyard Productivity".
For over 10 years now, Albacore Research has been the most innovative
company in ship building PC software.
=================
SESSION SCHEDULE
> 17 APRIL, morning (will be repeated on 22
APRIL, morning) - review of principal features of Structure, Outfit
and Nesting
* Overview and program philosophy
* The product model
* Project management and set-up
* Units and Planar groups
* Plate and profile parts
* Flanges (faceplates), brackets and standard parts
* Interference checking
* Outfit parts
* Output drawings: workshop, assemblies, stiffener plots
* Database reports
* Nesting
* NC codes
> 17
APRIL, afternoon (will be repeated in Antibes on 22 APRIL,
afternoon) - review of principal features of Piping
* Overview and program philosophy
* The pipe drawing
* Placing pipes and fittings
* Routing a bent pipe
* Defaults, Specifications (Specs) and Stocks
* Connections
* Importing pipes
* Creating and placing a valve
* Penetrations
* Defining spools
* Spool drawings
> 18
APRIL, all day (will be repeated in Antibes on 23 APRIL,
all day)
* Structure, Outfit, Nesting: hands-on training with examples
* open Question & Answer session
> 19
APRIL, all day (will be repeated in Antibes on 23 APRIL,
all day)
* Piping: hands-on training with examples
* open Question & Answer session
=====
HANDS-ON TRAINING
Hands-on training is designed to be carried out on modern lap-tops
and ordinary desktop PCs: P3/500 with 128Mb of ram, with graphics
of 1024x768 will be adequate. Lower specification computers are
not recommended. The exercises will follow a printed tutorial,
so that participants can later repeat the exercises or practice
on their own with the guide.
VERY
VERY IMPORTANT !!!
Participants must bring their own lap-top or desk-top computer
/ monitor.
Alternatively, upon request, DS&T can indicate details of
companies for rental of a computer on-site. Please note well that
DS&T is NOT in a position to rent computers for participants.
Participants must install the ShipConstructor software on their
computer before the seminar. Install CDs will be shipped up to
1 week before the seminar dates, after confirmation of registration.
=====
COST
· The presentation sessions will be free (17 and 22 April).
Lunch will NOT be provided.
· The
hands-on training sessions are not free. Fees will be charged
as follows:
> Structure, Outfit, Nesting hands-on training: €uro 495
per person, to be paid in advance. Lunch is included.
> Piping hands-on training: €uro 495 per person, to be
paid in advance. Lunch is included.
Participants
to the hands-on training sessions will receive a free 30 day trial
license (single seat, stand-alone), and 10% discount on ShipConstructor
purchases completed before 31 May 2002.
VERY
VERY IMPORTANT !!!
Payment is to be completed in advance.
Registration will not be accepted if a telefax and telephone number,
and a European VAT number are not indicated.
For hands-on training sessions only:
Payment by credit card is strongly encouraged: accepted cards
are Visa, Carte Bleu, MasterCard, American Express and Diners
Club.
Registration for the hands-on training sessions will not be accepted
and confirmed without payment.
Corresponding invoice and receipt of debit transactions for credit
cards will be sent with confirmation of registration acceptance.
=============
REGISTRATION
The number of available seats is limited, and will be assigned
on a first-come first-served basis.
It is easy to register: simply fill the registration form at the
end of this document, and fax it or e-mail it to Design Systems
& Technologies today.
Upon acceptance, the registration form will be FAXED back to the
accepted participant.
==========
LOGISTICS
Travel
to AMSTERDAM
> Travel: Amsterdam Schipol airport, nearest train station
is Schipol airport
> the venue will be held at the airport or in its vicinity,
definitive location to be announced
Travel
to ANTIBES
> Travel: nearest airport is Nice, nearest train station is
Antibes, by car take Autoroute A8, exit 44 Antibes
> Hotel Mediathel, Route des Crêtes, Sophia Antipolis,
tel +33-(0)4-92 94 68 00 / fax +33-(0)4-93 65 43 41 / e-mail info@mediathel.com
/ www.mediathel.com
> also see map appended at the end of this document
===========
QUESTIONS ?
Please contact Design Systems & Technologies today.
I look forward to seeing you there !
Sincerely,
Nick DANESE
Director
go
to Registration Form
|
