Design Systems & technologies presents
Rhino3D v.2 + Flamingo Intermediate / Advanced Training Seminar @ DS&T 6-7 May
> Generic Surface Modelling & Ray-Tracing / Radiosity Rendering <
=================================================================
RHINO 3D + FLAMINGO INTERMEDIATE / ADVANCED TRAINING
SEMINAR
=================================================================
Antibes
- Sophia Antipolis, 6-7 May 2002
by McNeel
Europe (E) & Design Systems & Technologies (F)
Mediathèl Hotel in Sophia Antipolis (06), Route des Crêtes,
tel +33-(0)4-9294 680
Speaker:
Mr. Carlos PEREZ - McNeel Europe (E)
=================================================================
Click to download
RhinoTrainingSeminar0205.PDF document. Requires ACROBAT v. 5
=================================================================
==========================
SEMINAR LANGUAGE, LANGUE, LINGUA, IDIOMA
Seminar language will be English
> traduction en Français disponible
> traduzione in Italiano disponibile
> traducción en Español disponible
===========
IMPORTANT
FRANÇAIS:
> Ce séminaire est conçu pour utilisateurs des niveaux
au moins moyen. Utilisateur de niveau moins élevé, veuillez
contacter Design Systems pour plus d'information.
> Les places seront limitées pour assurer l'efficacité
de la session de formation (travaux pratiques)
> Les participants devront amener leur propre ordinateur (portable
de préférence)
> Les participants recevront une remise de 10% sur tout achat Rhino3D,
Flamingo, AccuRender ou Phaser avant le 31 Mai 02
ENGLISH:
> This seminar is designed for users of at least intermediate level.
Other users, please contact Design Systems Technologies for more information.
> The number of available seats will be limited to ensure maximum effectiveness
of the hands-on training session.
> Participants are required to bring their own (lap-top) computer.
> Participants will receive a 10% reduction on Rhino3D, Flamingo, AccuRender
or Phaser purchases before 31 May 02.
ITALIANO:
> Questo seminario è destinato ad utenti di livello almeno medio.
Utenti di altro livello, vogliate contattare Design Systems & Technologies
per informazioni ulteriori.
> Il numero dei partecipanti sarà limitato per assicurare l'efficacia
della sessione di formazione pratica.
> I partecipanti dovranno portare il proprio computer (si raccomanda
un portatile).
> I partecipanti riceveranno una riduzione del 10% sugli acquisti Rhino3D,
Flamingo, AccuRender o Phaser entro il 31/5/02.
ESPAÑOL:
> El seminario está dirigido a usuarios de nivel intermedio.
Contactar DS&T para más información sobre otros niveles.
> El numero de plazas disponible es limitado, con el fin de asegurar
la eficacia de las sesiones practicas.
> Es necesario que los participantes traigan su propio ordenador (se
recomienda portátil).
> Los participantes se beneficiarán de un 10% de descuento en
la compra de Rhino3D, Flamingo, AccuRender o Phaser antes del 31 Mayo
de 2002.
==================
RHINO3D v.2
Rhino3D is today the most popular and easy generic surface modeller available.
Start with a sketch, drawing, physical model, or only an idea - Rhino
provides the tools to accurately model your designs ready for rendering,
animation, drafting, engineering, analysis, and manufacturing. Rhino can
create, edit, analyze, and translate NURBS curves, surfaces, and solids
in Windows. There are no limits on complexity, degree, or size. Rhino
also supports polygon meshes.
Special features include:
Uninhibited free-form 3-D modelling tools like those found only in products
costing 20 to 50 times more. Model any shape you can imagine.
Accuracy needed to design, prototype, engineer, analyse, and manufacture
anything from an airplane to jewelry.
Compatibility with all your other design, drafting, CAM, engineering,
analysis, rendering, animation, and illustration software.
Read and repair extremely challenging IGES files.
Accessible. So easy to learn and use that you can focus on design and
visualization without being distracted by the software.
Fast, even on an ordinary laptop computer. No special hardware is needed.
Affordable. Ordinary hardware. Short learning. Priced like other Windows
software. No maintenance fees.
=======================
FLAMINGO for RHINO3D v.2
Flamingo brings the features of AccuRender's raytrace and radiosity rendering
technology to Rhino.
Rendering - Photometrically accurate images with reflections, refraction,
diffusion, translucency, transparency, color bleeding, shadows, depth
of field, depth attenuation, ClearFinish™, and indirect lighting.
Animation - Viewpoint animation for walk-throughs and fly-bys, and sunlight
animation for shadow studies.
Other features - Procedural clouds, fractal-generated 3-D plants, procedural
2-D and 3-D materials, progressive-refinement for quick preview, and extensive
material, plant, and background libraries.
Hardware requirements - Flamingo run inside Rhino and has the same hardware
requirements. Rhino with Flamingo runs on ordinary Windows desktop and
laptop computers, with:
o Pentium, Celeron, or higher processor.
o Windows 95/98/NT/ME/2000/XP for Intel or AMD.*
o 40 MB disk space.
o 64 MB RAM. More is recommended.
*Rhino and Flamingo will NOT be ported to any other operating system.
==================
SESSION SCHEDULE
> 6 May - review
of software features to be covered and hands-on session
* Introduction - course objectives
* Customizing workspace, toolbars and buttons
* NURBS Topology
* Curve creation
* Surface continuity
* Advanced surfacing techniques
* Open Question & Answers
> 7 May - review
of advanced software features and hands-on session
* Using background bitmaps
* Different approaches to modelling
* Using 2D drawings
* Sculpting
* Troubleshooting
* Making meshes from NURBS objects
* Rendering with Rhino
* Rendering with Flamingo
* Open Question & Answers
===============================
DESIGN SYSTEMS & TECHNOLOGIES
www.ds-t.com
Active exclusively in the ship design and ship building industries for
over 15 years, we have equipped over 400 companies in Europe alone with
specialized software. We also provide expert training, technical support
and engineering services to our customers. DS&T is not simply a software
vendor, but rather a long term, supportive partner.
=====
COST
Participation to the 2-day seminar will costs Euro 995 per person, payable
in advance (includes lunch on both days).
Paid registration before April 12 receives a 10% discount.
Lunch on both days is included in the participation cost.
NB: le prix de 995 €uro est hors taxes. Les participants Français
devront y rajouter la TVA à 19.6%, soit 195 €uro. Ceci sera
indiqué su la facture.
VERY VERY
IMPORTANT !!!
Payment is to be completed in advance.
Registration will not be accepted if a telefax and telephone number, and
a European VAT number are not indicated.
Payment by credit card is strongly encouraged: accepted cards are Visa,
Carte Bleu, MasterCard, American Express and Diners Club.
Registration for the hands-on training sessions will not be accepted and
confirmed without payment.
Corresponding invoice and receipt of debit transactions for credit cards
will be sent with confirmation of registration acceptance.
=============
REGISTRATION
The number of available seats is limited, and will be assigned on a first-come
first-served basis.
It is easy to register: simply fill the registration form at the end of
this document, and fax it or e-mail it to Design Systems & Technologies
today.
Upon acceptance, the registration form will be FAXED back to the accepted
participant.
==========
LOGISTICS
> Travel: nearest airport is Nice, nearest train station is Antibes,
by car take Autoroute A8, exit 44 Antibes
> Hotel Mediathèl, Route des Crêtes, Sophia Antipolis,
tel +33-04-92 94 68 00 / fax +33-04-93 65 43 41 / e-mail info@mediathel.com
/ www.mediathel.com
> also see appended map
============
QUESTIONS ?
Please contact Design Systems & Technologies today.
I look forward to seeing you there,
Sincerely,
Nick DANESE
Director
Design Systems &
Technologies
150 Rue de Goa, 06600 Antibes, France
tel +33-(0)4-9291 1324 / fax +33-(0)4-9291 1338
ds-t@ds-t.com / nd@ds-t.com / www.ds-t.com
