GHS TIPS

 

Demonstration of checking for angle of maximum RA being less than 30. Report off proj 130173.
MACRO ParC
LIMIT TITLE "Paragraph c"
UNIT LT
LIMIT (1) GM UPRIGHT > 0.49
LIMIT (2) ANGLE AT MAX > 15
LIMIT (3) AREA FROM 0 TO MAX AT 15 > 13.1
LIMIT (4) AREA FROM 0 TO MAX AT 30 > 10.3
LIMIT (5) AREA FROM 0 TO 40 OR FLD > 16.9
LIMIT (6) AREA FROM 30 TO 40 OR FLD > 5.6
VARY TRIM
/
read sv.gf
report
.ParC
vcg=10 `floor
maxvcg 10, 11, 12 /trim: -1, 0, 1
macro d
`Checks limit margins at max VCG for given LCF draft and trim.
heel=0
trim=%2
draft=%1
solve weight, lcg
vcg=max
solve lcg
vcg=max
\\The following case is at trim = %2, displacement = {weight:2}\
ra /lim /notab
/
macro t
`Covers range of drafts as in MAXVCG at given trim.
.d 10 %1
.d 11 %1
.d 12 %1
/
LIMIT(9) ANGLE FROM MAX TO 30 > 0
maxvcg valid
page
\\Checking limit margins at maximum VCG\
\Check to make sure that limit #9 is positive for all cases\
`Trims as in MAXVCG:
.t -1
.t 0
.t 1
end

 Previous document Back