Proper use of the Model Converter /3D parameter

Question QA036 :
Recently I tried to convert the .GF file to a 3D .DXF file using the following command

MC inputfile outfile /3d:ltv
and came out with the following error: Improper coordinate remap: LTV.
The Model Converter /3D parameter must be given either without any secondary parameters or with the letters X, Y and Z placed in the l, t and v positions. For example,
MC ... /3D:ZXY
the GHS Longitudinal axis in place of the DXF Z axis;
the GHS Transverse axis in place of the DXF X axis;
the GHS Vertical axis in place of the DXF Y axis.

 Previous document Back